Or try out our product chooser to narrow it down.
1-800-685-3072
The Model 50P Automatic Numbering Head represents the finest marking device in the industry for rapid, accurate, and consecutive numbering. Since 1935, the Model 50P has been steadily improved to become an industry leader. We are still supplying parts and servicing numbering head units over 40 years old, a true testimonial to American quality and design.
The Model 50P numbering head is used by many different industries. For example, animal tag manufacturers may utilize the Model 50P's hot stamping capabilities. When equipped with our Optional Hot Stamping Equipment and flat face gothic characters, mounted in a hot stamp press, a consecutive colored sequence can be obtained.
The Model 50P numbering head can be modified in many ways to suit specific marking situations. See the Model 50P Custom Applications page to view a few units that Numberall has custom designed and built.
During the marking sequence, the actuating arms are extended and retracted by an external means to advance the head to the next consecutive number. A pair of coil-return springs designed for each different frame provide the proper tension for smooth actuation.
The zero suppression feature allows for the omitting of leading zeros when stamping low digit numbers. The wheels are manually pre-set to the blank position between the "0" and "1" characters on the wheels. When the number is sequenced from 9 to 10, the tens wheel is indexed automatically from the blank position to the character "1". This procedure continues until all the automatic wheels have been advanced.
The Model 50P is constructed with a one-piece wheel and index plate, to prevent misalignment and errors that can occur with two-piece construction. All "unit" or "ones" wheels are constructed with a thicker index plate, retaining pawl and actuating pawl prongs. All wheels are manufactured from the best heavy duty tool steel and precision heat-treated for severe usage and long life. As the number of wheels increases, the frame and leg widths increasing accordingly.
The actuating pawl is geometrically designed, and the actuating arms are hard chrome plated for durability. Our exclusive pawl block aids the retaining pawl in maintaining precise wheel alignment and preventing wheel binding.
The Model 50P can be adapted to virtually any press. Our standard shank is 1" diameter x 1-1/4" or 2" long. We offer a standard dovetail shank to fit Numberall's hand or power presses or Model 116 Dovetail Adaptor.
We can make custom round or rectangular shanks. We can omit the shank and provide tapped mounting holes or install a custom designed adapter. Or we can leave the top flat so the customer can drill and tap or mount an adapter. Please request a factory quote.
See the Model 50P Optional Equipment page for details and photos. Consult factory for pricing and availability.
Letters (14 division manually set only)
A B C D E F G H I J K L M and blank
Figures (10 division automatically or manually set plus blank half-position)
With 1.5" diameter wheels
With 2-1/4" diameter wheels and proportionally larger frame and parts
With 3" diameter wheels and proportionally larger frame and parts
When ordering, please specify the following: