Product Spotlight: Model 94 Press

Technical Guide: Operating the Model 94 for Perfect Alignment & Efficiency

The Model 94’s design emphasizes “set-it-and-forget-it” simplicity. Automatic character spacing keeps horizontal alignment consistent, even with frequent dial changes, ensuring professional, legible multi-line marks every time.

Setup & Stamping Process (Step-by-Step)

1. Secure the Part — Place your nameplate, tag, or flat part under the three integrated clips to hold it firmly stationary during the stroke.
2. Position the Table — Loosen the table screw and slide the table in/out to align your starting line. Adjust vertically (via the table mechanism) to accommodate varying part thicknesses.
3. Set Impression Depth — Turn the knurled nut at the base of the press to fine-tune depth. Once set, every character indents uniformly—critical for consistent readability.
4. Prepare the Starting Position — Pull the handle halfway down and slide the table fully to the right (or left, depending on direction) to align the dial a few spaces before your marking area. Return the handle to the top.
5. Engage Spacing (Blank Space Start) — Pull the handle halfway once more to activate the spacing mechanism without stamping—this ensures proper engagement and prevents misalignment on the first real character.
6. Select & Stamp — Rotate the mono-character dial by hand to your desired letter/number/symbol. Pull the lever fully down to stamp, then release—it automatically advances the table for the next character.
7. Multi-Line Marking — For additional lines, loosen the thumb screw, slide the table inward to the next vertical position, and repeat steps 5–6.

Watch our demo video for visual guidance: Model 94 Tag Stamping Press Demo

Built for Severe Shop Usage: The Numberall Standard

• Heavy-Duty Construction — Full cast iron frame (no lightweight die-cast parts) resists flexing or cracking under high-impact strokes.
• Precision Components — Engraved, heat-treated tool steel character wheel for absolute accuracy and long-term wear resistance.
• Custom Fixturing — We engineer tailored nests, strip holders, or slides to your part geometry—boosting throughput for unique or high-volume jobs.
• Mechanical Reliability — Thrives in oily, dusty, high-heat environments where electronic systems fail—no software, no optics, no maintenance fees.

Why Choose the Model 94 Over Electronic Alternatives?

Ready to Simplify Your Variable Data Marking?

Don’t let frequent changes slow your line or compromise mark quality. The Model 94 provides the heavy-duty flexibility and mechanical reliability shops demand.

Contact our Engineering Team today at 207-876-3541 or sales@numberall.com for a quote, custom nesting discussion, or no-cost sample marking on your parts. Let’s engineer the perfect setup for your application.

Numberall Stamp & Tool Co. – Precision, Permanence, and Performance Since 1930. Made in the USA.