How to Use Numberall’s Model 301 to Stamp Round Parts

Mastering Round Part Marking: The Efficiency and Reliability of the Model 301 Roll Marking Press

Marking cylindrical or round parts—like pipes, tubes, shafts, valves, gas cylinders, axles, or bearings—demands consistent depth, perfect alignment, and no slippage to maintain traceability and compliance. Flat marking presses often fall short here, leading to uneven impressions or part damage.

At Numberall Stamp & Tool Co., the Model 301 (manual) and Model 301A (air-operated) Roll Marking Presses offer an economical, purely mechanical solution for light-duty to medium-volume applications. These compact, bench-top machines deliver uniform, deep, permanent indents on round parts up to 1-5/8″ diameter (standard) or larger with oversize arm configurations—without software, sensors, consumables, or complex setup.

Unlike electronic or high-tech roll markers (e.g., from GT Schmidt’s pneumatic/rotary systems, Pryor, Telesis, or MECCO dot peen alternatives), the Model 301 relies on simple mechanical rolling action. It uses far less pressure than traditional presses, reducing operator fatigue while ensuring even depth across the circumference—ideal for steel, aluminum, and other materials.

Key Benefits of the Model 301 Series

• Economical & Durable — Built from heat-treated tool steel for decades of reliable service; no lenses, inks, or software updates.
• Even Depth & Precision — Roller fixture and controlled stroke prevent slippage for consistent, legible marks.
• Versatile Compatibility — Works with standard Numberall heads; no proprietary tooling required.
• Customizable — Oversize endplates add clearance (up to +4-1/4″ with second set); special fixtures for unique geometries (e.g., angled neck marking on CO2 bottles).
• Low Maintenance — Mechanical simplicity means minimal downtime in oily, dusty, or high-heat shops.

---

6-Step Setup & Operation for Precision Results

The Model 301’s straightforward design makes it quick to set up and operate—perfect for high-repeatability in small-to-medium batches.

• Secure the Fixture — Turn the handle to adjust and tighten the clamp on the adjustable holding fixture to match your part’s diameter (standard range: 3/8″ to 1-5/8″).
• Load the Part — Place the cylindrical part in the fixture—it rotates freely as marking occurs.
• Position the Head — Slide the marking head over the part; use the adjustment knob for light initial contact.
• Set Depth — Fine-tune the knob to preset consistent impression depth for uniform results across runs.
• Execute the Mark — Pull the handle backward or forward (marks in either direction for faster cycles). Manual operation is smooth; pneumatic (301A) uses air for reduced effort and higher throughput.
• Cycle & Repeat — Remove the marked part, load the next, and repeat—swap heads as needed for different data.

For larger parts or special needs, opt for oversize configurations or custom fixtures—our engineers tailor them to your drawings.

> View Model 301 Manual Roll Marking Press Demo Video

> View Model 301A Pneumatic Roll Marking Custom Demo Video

---

Versatile Marking Heads for Any Job

Switch heads quickly on the same machine:

• Model 23P Type Holder — For fixed text, logos, or multi-line static branding.
• Model 70P Non-Automatic Head — Manual indexing for variable data.
• Model 50P Automatic Head — High-speed consecutive serialization.

Manual vs. Pneumatic: Match Your Volume

• Model 301 (Manual) — Hand-operated for portability, zero energy use—ideal for low-to-mid volume or bench-top shops.
• Model 301A (Air-Operated) — Pneumatic cylinder drives the stroke—cuts fatigue, boosts speed for higher production.

---

Why Shops Choose Numberall for Cylindrical Marking

In industries like automotive (shafts/axles), aviation (components), oil & gas (pipes/valves), and general manufacturing (tools/saws), the Model 301 provides cost-effective permanence without the complexity of competitors’ automated or electronic systems. Fast ROI, low consumable cost, and backed by our lifetime support.

Ready to mark your round parts efficiently and permanently? Contact our Engineering Team today at 207-876-3541 or sales@numberall.com. Send your part dimensions/drawings for a no-cost technical review, sample marking, or custom fixture quote.

Numberall Stamp & Tool Co. – Precision, Permanence, and Performance Since 1930. Made in the USA.